rangerovers.pub
The only place for a coil spring is up Zebedee's arse.
Member
Joined: Feb 25 2020
Posts: 209

Having asked permission to The Chief, He Has Agreed to open up a topic where we can share what we might have to give away, or need to find, for our RRP38s, whether is for sale, to buy, swap, or donate to another fellow in the pub forum :-)
His Only Requirement was <<not to spam with sales listings for every single bit and to remember to give "mate's rates" to forum members>> :-)
No need for specific rules, but to make it easier it would help to state where the item is, or where it can be delivered, condition, etc. ... and once sold/found to clear it or update the posts!

Member
Joined: Aug 05 2019
Posts: 123

Well I can kick off. Intermediate steering shaft for a classic or disco 1. In Australia of course. Brand new.

Not P38, but there you go ......

Member
Joined: Aug 07 2019
Posts: 193

i have 4 classics from 82/ 87 models, no motors or gear boxes but most other bits.

Member
Joined: Sep 12 2018
Posts: 39

Would be great if anyone has a TAN / brown centre console and the sidewings in TAN / brown.

Give and take ... I have a very good security stowage box for the rear boot compartment, STC8532, complete with genuine fixing kit, but sadly no keys.

Member
Joined: Feb 25 2020
Posts: 209

The side cheeks in TAN are a rare find, but is this color?
https://www.ebay.co.uk/itm/RANGE-ROVER-P38-Centre-Console-94-To-02-Cream-Tan-Out-Of-2001/293576763189?hash=item445a89e735:g:Q6MAAOSwwf1euX34
Where are you based? Send photos and info on the security case I will fw to a friend :-)

Member
Joined: Sep 12 2018
Posts: 39

leolito ... in continental Europe, germany to be exact (at least geographically, mentally don't ask me).
The side wings might be a matching color, but they don't look matching the state of the car, to be honest. They look a bit derelict ... but thx for the link, definitely worth looking. I have enough patience, all the ones I found since I own my actual P38 were in a state, which makes me wonder if it is the feature of side wings in TAN to be sticky, scratched or just from a commercial van ;-)
I am thinking right now about a centre console sprayed professionally in TAN ... as a contrast to all the wooden ones ;-)
Upwards to the part, where all the buttons are located. I've seen one in beige / light stone the last days in another forum and I liked that very much.
Images will come tomorrow ...

Member
Joined: Apr 23 2019
Posts: 572

This is going to get unmanageable fast...Do we need a separate "market place " folder, and then we can do a separate post for the members who have stuff ? then we can close each post out... Anyway, for as long as we are doing it this way, I have a couple of the clip-on radiator cowl sections for Thor. If anyone needs then please PM me. I guess a tenner plus P&P?

Member
Joined: Aug 05 2019
Posts: 123

If anyone has a couple of GEMS knock sensors, then I can give them a good home.

Member
Joined: Mar 22 2016
Posts: 1213

Iā€™m not even going to list one thing, I could fill this page with the stuff that has to go, unfortunately Iā€™m in the middle of a large shed build and guess where everything is stored šŸ™„šŸ™„

Member
Joined: Feb 25 2020
Posts: 209

Well, me also got very messy lately, but there are couple items I can let go - and find quickly if needed:

I got a lot of 2x Alpine radio units (Thor), one working with valid code, display ok, (only the volume acts up once in a while), the other I never tried it. Also 2x matching Alpine CD-changers with the magazines, one was checked by a service and cleaned up, is working but it jumps a bit (I fixed the silicon buffers but it did not do the trick), the other I don't know.
I moved away from the OE units and will not be going back, so these are available for any purist interested.
Since they all have some issue of sort, and True to His Word - remember the "mate's rates" :-) - I consider the lot "good for parts" and will accept any reasonable offer :-)

Member
Joined: Feb 25 2020
Posts: 209

I got a favor/request instead, to any US-resident ... I am trying to buy some stuff from there and although I have a shipping address and all arranged, I can't get to buy it since the online form gets "confused" with me being non-US but having a US-address for delivery mismatching - obviously - my CC/billing address. If anyone feels compelled to help, PM me and I will explain :-)

Member
avatar
Joined: Dec 30 2015
Posts: 4921

I've got a want. I could do with a LH front fog light (early style), as mine has a stone chip (or bullet) hole in it and is filling up with rainwater......