rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 167

Hi all.
I don't suppose any has set of the steel washers that go on the EAS pump mounts they would like to part with. Or if you could point me in the right direction to buy some. I have looked and can't find them anywhere. The rubber mount no problem but the washers no.
Cheers Rob.

Member
avatar
Joined:
Posts: 7756

Original part number was STC3068 but superseded to RVL100030.

https://rimmerbros.com/Item--i-RVL100030

https://www.lrdirect.com/RVL100030-supplied-by-bearmach-branded-bm.html

https://www.johncraddockltd.co.uk/superseded/stc3068-use-rvl100030.html

Or just get flat washers from B&Q and hit them with a ball pein hammer

Member
Joined:
Posts: 167

Cheers Gilbert. I obviously wasn't looking hard enough.
Rob.