Finally got all my bits to start replacing the H/G.
Just swapping over the brackets from the old cylinder head to new and also the bolt from the front of the R/H ( passenger side) cylinder head that goes to a part on the aux belt.
I cant undo it as it doesnt have a fixed nut, Ive tried using grips to no avail. Does any one know a part number or name of this bolt.
Have you tried locking two nuts together on the threaded part? As it's your scrap head you could also apply some heat to the head in the vicinity of the stud
Yeah, tried the 2 nuts trick.
I dont have a heat source , just thinking it will be cheaper and quicker to buy a replacement if its possible.
Nowhere near my Microcat at the moment, but this site was recommended in another thread on here: <br>
http://www.allbrit.de/NAV.cfm?PAGE=824356&SPRACHE=EN <br>
Happy hunting!
Thanks OB, had a look but couldnt see it, though I know that link will come in handy so it wasnt wasted.
Looks to me like it's ERR6445 (a stud with a 3/8 UNC thread at one end and an M8 at the other) but earlier ones used a 3/8 UNC bolt which is ERR6444.
I think you are right Richard, oddly none of the usual dealers have a picture though they sell it.
I only found 1 picture on google and it looks the same as what I need.
Thanks.
A pair of stilsons will move it, saves waiting for more parts
Unfortunately I dont have one so will still have to wait to get one but thanks for the recommendation.