rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Opening time
  4. Alternator
Alternator

no10chris

Member
Joined:
Posts: 1327
#1

Just a quick one,was changing alternator over, the small captive nut on the back, wasn’t very captive, and disappeared into the abyss, anyone know what thread mm wise it is, I’m thinking 5 but I might be wrong

romanrob

Member
Joined:
Posts: 804
(Last modified: by romanrob)
#2

Do you mean the one that is held to its wire by "claws" ?

no10chris

Member
Joined:
Posts: 1327
#3

romanrob wrote:

Do you mean the one that is held to its wire by "claws" ?
Yes, that’s the one

Harv

Member
Joined:
Posts: 676
#4

I'm pretty sure it's 5mm. My smallest metric tap is 6mm and too big. A 10-32 (4.8mm) screw threads into the nut nicely, but loosely.

romanrob

Member
Joined:
Posts: 804
#5

I hand-tightened an M5 nut on the stud just now, so that's your boy

Are you sure that you want to perform this action? This action is irreversible.