rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Oily bits
  4. Starter bolt size
Starter bolt size

Marshall8hp

Member
Joined:
Posts: 383
(Last modified: by Marshall8hp)
#1

Guys, can anyone advise on the hex size for the starter bolts? Looking at them I'd say 8mm or 10mm but as I need to buy a hex socket, I thought I'd ask ......

DavidAll

Member
Joined:
Posts: 334
#2

The parts manual says 3/8" UNC. Mine has socket head bolts which a TX 50 just about fits as a bodge or a 7.8mm allen key for a good fit.

Gilbertd

Member
avatar
Joined:
Posts: 8082
#3

8mm. At least that's what my hex head socket says on it.

BrianH

Member
Joined:
Posts: 1141
#4

3/8" UNC sounds more like a description of the thread than the head of the bolt.

Marshall8hp

Member
Joined:
Posts: 383
#5

Thanks guys.

Are you sure that you want to perform this action? This action is irreversible.