rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Oily bits
  4. Prop shaft donut torque setting
Prop shaft donut torque setting

tanis8472

Member
Joined:
Posts: 501
#1

As title. Anyone know the actual torque settings for the big bolts through the rear donut.

Rave shows uj's and no specs.

I've gone 78nm as that's tight and seen several posts on web with similar specs.

Cherrs

Gilbertd

Member
avatar
Joined:
Posts: 7822
#2

RAVE says 78Nm for all 7/16th bolts not listed on the last page of the torque settings. So if they are 7/16th bolts, that should be correct.

tanis8472

Member
Joined:
Posts: 501
#3

Thanks Richard. Didn't see that.

Are you sure that you want to perform this action? This action is irreversible.