rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
avatar
Joined:
Posts: 10

Hi, I'm the newbie here. We have a 97 4.6 HSE in beluga black/ash grey 16" Stratus alloy wheels.
In the 18 months since we bought it, we have had to invest an incredible amount in the technical side of things. Because the workshop was not good, the car still doesn't drive perfectly.
Now I'm trying to do it myself and it's been much better since then.

I look forward to a good exchange here.

Best regards
Archie

Member
avatar
Joined:
Posts: 8105

Hi Archie, saw you on the dark side, so welcome to the sensible forum. You'll get a much better standard of help here than over there.

Member
avatar
Joined:
Posts: 201

hi Archie, welcome here, too! Happy to see You! Let's take it as a challenge ... as I said many times: You've not just bought a car, but another hobby / passion. Enjoy!

As Richard said: Much better here, than there ... but Richard / GilbertD is on both forums, so You are probably in the best company You can imagine ;-) redundancy rules, like with medical doctors, always get a qualified 2nd opinion ...

Whenever You might have wondered about the support You have got, I learned it here / there ...

Member
avatar
Joined:
Posts: 10

Nice to hear/read that. In any case, it's a lot of fun that the car is making progress. In the workshop it always went backwards. More errors when I picked it up than when I dropped it off. Many thanks to KCR for his extensive support over the last few months!

Archie

Member
avatar
Joined:
Posts: 10

And by the way. How do I also get a picture in my avatar? Haven't found anything here.

Archie

Member
Joined:
Posts: 1141

Welcome Archie

You can set it on the page here > https://rangerovers.pub/user/settings/user-details

You need to upload your avatar somewhere (Imgur seems the easy option) and then paste the address of the image into the Avatar box

You can access that page above from the drop down box next to your name at the top of the page, and selecting settings and then selecting the change user settings page as well.

Member
avatar
Joined:
Posts: 8105

There's a maximum size if I remember right, the image must be small.