I opened up the bonet today to check oil, coolant, etc & notice that the windscreen washer tubing on the drivers side (RHD) was dangling from the bonnet. Examination revealed that a right angle connection in the tubing should clip onto a plastic stud that secures the insulating blanket under the bonnet. I foolishly tried to lever out the plastic stud with a screwdriver causing top out & disappear somewhere in the engine compartment. I secured the tubing to the insulation with gaffer tape but the insulating blanket is hanging down when the bonnet is open because of the missing stud. This is all a longwinded way of saying does anyone know where I can get a replacement. I looked on Rimmer's website www.lrparts.net but can't find it.
https://ibb.co/LdTVrJm