Trotting back from Manchester the middle of last month the windscreen was hit by a stone about an inch and a bit from the bottom and pretty much under the parked position of the driver wiper blade close to the drive shaft. Crack started out about 6 inches long on the outer screen and spread steadily. By now it's pretty much all the way across the screen on both sides of the glass. Presumably the recent freezing weather didn't help.
So it needed fixing pronto.
Doing the usual insurance company route AXA directed me to the Autoglass portal and I got an appointment for January 25th at Tonbridge around 13 miles away. Was about 10 day wait which is annoying but I guess acceptable.
Half way to the appointment I got a phone call saying they couldn't do the job then and that they would be back in touch to re-arrange.
Total silence from Autoglass since.
Managed to dig out the semi-secret phone number to speak to a human but two calls haven't gotten me much beyond "An e-mail has been set to our technical help desk." So far as I can see the semi-secret phone number goes to a trained petting and feather smoothing person who isn't really authorised to do anything. First time round I did get the pleasure of 20 minutes on hold listening to "music!" that was crappy even before being wrecked by the on hold filters. Small reward was being able to tease out a suggestion that the issues were due to some of the external trim being obsolete and no longer available from Land Rover. Second call was less helpful.
So tell me something I didn't know.
Looks like that as of now the lower trim is un-obtanium new, pattern upper trims can be got and trim clips for both can be found but it's unclear whether or not they are factory or pattern. So whats the next move given that I've already started the insurance company route.
Ultimate fall back is I buy a screen, find trims, accepting used but good for the lower, and pay an independent fitter to do the deed. Approaching £1,000 I fear. Ouch!
Last time round Direct Line got National Windscreens on the job. Fitted a pattern, un-tinted screen with iffy heating, re-used the old trim and dislodged the rubber finisher between screen and dashboard. Also managed to damage the bottom trim and, I suspect, some of the clips. Not going there again.
Clive