rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 672

Looking for old stuff ... what happened here? Any progress made?

Member
Joined:
Posts: 112

I didn't do a good job of updating this thread at all!

The wheel carrier has been on the car for 2 and a half years now. It's done many trips and is holding up well!
I'll post a detailed update soon.
We're in the bush for a getaway weekend:

enter image description here

Member
Joined:
Posts: 162

Looks great

Member
Joined:
Posts: 112

Version 1 of the wheel carrier is being retired soon after many years of good service.

Version 2 is in development :D
enter image description here

Version 2 will follow the vehicle lines better (closer and angled more along the curves of the tailgate), will incorporate a maglock for locking, a gas strut to keep the carrier open or closed as required and a relocated high lift jack mounting so that it stops catching trees as we move along. Nice!

Member
Joined:
Posts: 112

First test fit of V2. I'm going to be tilting the wheel forward a little more to give the jack at the bottom a bit more space but other than that I'm happy with it.
The next complicated bit is to cut the bumper skin in the right places so that it clears everything but doesn't leave big gaping holes everywhere. Oh, and it still needs paint.

enter image description here

enter image description here

enter image description here