rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 645

Having asked permission to The Chief, He Has Agreed to open up a topic where we can share what we might have to give away, or need to find, for our RRP38s, whether is for sale, to buy, swap, or donate to another fellow in the pub forum :-)
His Only Requirement was <<not to spam with sales listings for every single bit and to remember to give "mate's rates" to forum members>> :-)
No need for specific rules, but to make it easier it would help to state where the item is, or where it can be delivered, condition, etc. ... and once sold/found to clear it or update the posts!

Member
Joined:
Posts: 383

Well I can kick off. Intermediate steering shaft for a classic or disco 1. In Australia of course. Brand new.

Not P38, but there you go ......

Member
Joined:
Posts: 549

i have 4 classics from 82/ 87 models, no motors or gear boxes but most other bits.
update . all classics have been sold .

Member
avatar
Joined:
Posts: 201

Would be great if anyone has a TAN / brown centre console and the sidewings in TAN / brown.

Give and take ... I have a very good security stowage box for the rear boot compartment, STC8532, complete with genuine fixing kit, but sadly no keys.

Member
Joined:
Posts: 645

The side cheeks in TAN are a rare find, but is this color?
https://www.ebay.co.uk/itm/RANGE-ROVER-P38-Centre-Console-94-To-02-Cream-Tan-Out-Of-2001/293576763189?hash=item445a89e735:g:Q6MAAOSwwf1euX34
Where are you based? Send photos and info on the security case I will fw to a friend :-)

Member
avatar
Joined:
Posts: 201

leolito ... in continental Europe, germany to be exact (at least geographically, mentally don't ask me).
The side wings might be a matching color, but they don't look matching the state of the car, to be honest. They look a bit derelict ... but thx for the link, definitely worth looking. I have enough patience, all the ones I found since I own my actual P38 were in a state, which makes me wonder if it is the feature of side wings in TAN to be sticky, scratched or just from a commercial van ;-)
I am thinking right now about a centre console sprayed professionally in TAN ... as a contrast to all the wooden ones ;-)
Upwards to the part, where all the buttons are located. I've seen one in beige / light stone the last days in another forum and I liked that very much.
Images will come tomorrow ...

Member
Joined:
Posts: 801

This is going to get unmanageable fast...Do we need a separate "market place " folder, and then we can do a separate post for the members who have stuff ? then we can close each post out... Anyway, for as long as we are doing it this way, I have a couple of the clip-on radiator cowl sections for Thor. If anyone needs then please PM me. I guess a tenner plus P&P?

Member
Joined:
Posts: 383

If anyone has a couple of GEMS knock sensors, then I can give them a good home.

Member
Joined:
Posts: 1327

I’m not even going to list one thing, I could fill this page with the stuff that has to go, unfortunately I’m in the middle of a large shed build and guess where everything is stored 🙄🙄

Member
Joined:
Posts: 645

Well, me also got very messy lately, but there are couple items I can let go - and find quickly if needed:

I got a lot of 2x Alpine radio units (Thor), one working with valid code, display ok, (only the volume acts up once in a while), the other I never tried it. Also 2x matching Alpine CD-changers with the magazines, one was checked by a service and cleaned up, is working but it jumps a bit (I fixed the silicon buffers but it did not do the trick), the other I don't know.
I moved away from the OE units and will not be going back, so these are available for any purist interested.
Since they all have some issue of sort, and True to His Word - remember the "mate's rates" :-) - I consider the lot "good for parts" and will accept any reasonable offer :-)

Member
Joined:
Posts: 645

I got a favor/request instead, to any US-resident ... I am trying to buy some stuff from there and although I have a shipping address and all arranged, I can't get to buy it since the online form gets "confused" with me being non-US but having a US-address for delivery mismatching - obviously - my CC/billing address. If anyone feels compelled to help, PM me and I will explain :-)

Member
avatar
Joined:
Posts: 8090

I've got a want. I could do with a LH front fog light (early style), as mine has a stone chip (or bullet) hole in it and is filling up with rainwater......

Member
Joined:
Posts: 645

I'll see how the one I have is. If intact, glad to send it your way...

Member
Joined:
Posts: 162

Have a few items fir sale, need the room.
Parcel shelf
18" wheel and tyre
Mirrors
Door cards
Pics on preloved

Member
Joined:
Posts: 222

After later design front and rear bumpers body coloured in oxford blue, without cracks/dents/scratches.

Also, a set of hens teeth if you have them too...

Member
Joined:
Posts: 549

Gilbertd wrote:

I've got a want. I could do with a LH front fog light (early style), as mine has a stone chip (or bullet) hole in it and is filling up with rainwater......
i have 3 but the postage would not be nice?

Member
Joined:
Posts: 549

i have just purchased a complete rover for parts (gems) and also picked up halve a car in parts also gems . will post in Australia if necessary, or out if you want to pay postage.

Member
avatar
Joined:
Posts: 8090

Leolito has one that he's going to send me. Or at least he's checking on postage to make sure it isn't going to be too expensive. This is what mine looks like at the moment.....

enter image description here

Member
Joined:
Posts: 549

if all else fails a could pop the lens off and send just the lens if thats a possibility.

Member
Joined:
Posts: 383

If anyone needs a new distributor for a 3.5, I have two new ones on the shelf.