Sinve I have had the car (1 year) I have to open and close the car with the key since the previous owner deactivated the alarm / remote system for whatever reasons.
Now I made most systems (except alarm) acive again but when I open/close the car via remote the driver door (LHD) does not open or close, all others including tailgate do.
I replaced the motor in the driver lock with one from a used rear lock, but that made no difference.
Opening/closing with key is fine. Sill switch works too.
Nanocom confirms that ajar switch works, cdl switch works and key switch works.
When I activate the locking mechanism via Nanocoms BECM / Outputs section I can also lock and unlock the driver door, so the motor must be working. BUT the functions are reverse, so when i activate the LOCK output, the door unlocks and vice versa.
Is that a Nanocom speciality like the way it confuses the blend motor sides left/right in the HEVAC section or is there an internal fault ?
Any advices are very welcome !