rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 424

Hello folks,

I have bolted up a recon gearbox to the engine and I have a 1-2mm gap between the flex plate and the torque converter. Is this normal to allow a bit of float or should the flexplate be up against the torque converter?

Member
avatar
Joined:
Posts: 7000

Yes, a small gap is normal. You need to worry when there is no gap as that means the torque converter isn't fully home onto the gearbox oil pump.

Member
Joined:
Posts: 424

Brilliant, thanks, particularly for the quick reply.