rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Ash
Member
offline
2 posts

Hi guys,

A customer has been to see me today with a 2001 Range Rover p38 and it shows abs warning light and traction failure on the dash.

I've plugged it in using my nanocom and it says rear left sensor short to another.

Now if I go into the live data it shows that front right, rear right and rear left sensors have 2.35 volts and the front left sensor shows 0 volts.

Also when I do a speed sensor check, the rear left shows that it's not moving and all the others show that they are moving on the live data.

Can anyone please help me with this??

Thanks in advance

Hi guy's

Thought I'd introduce myself..

I've had 6 p38's and done all manner of work on them, but we all need a little help from time to time.

I've got a nanocom diagnostics kit which is always helpful