rangerovers.pub
The only place for a coil spring is up Zebedee's arse
gareth37
Member
offline
22 posts
impact wrench in forum Oily bits

would a makita dtw450z impact wrench max Torque: 440Nm be good enough to take wheel nuts off a p38

p38 wont start when its cold in forum Oily bits

hi all got problem with my p38 its not starting when the weather gets cold today it temp of 5 here not -5 just 5 and it not starting and the glow plug were change 4weeks a go im getting bit of gray smoke out the back end but not joy firing up any ideas would be great help.

sluggish to start black smoke p38 in forum Opening time

hi all well shes been running great but sadly morning she was hard to start and when she did lot of black smoke from exhaust any ideas on the problem would be great

p38 2.5d

gear box and transfer box are they the same thing on the p38 in forum Oily bits

hii there iv change the oil in the front and rear diffs on my p38 got oil to do the transfer box as well but is the gear box and transfer box the same thing ?

p.s had to make new profile as i could not login iv got post on here as gareth 38 cheers