Thank you!
Try stefan63@gmail.com instead!
Your idé and project sounds nice looking forward to the folow up report when you have tested you new system.
stockholmviews.com is my website and you can find some P38 related stuff there if you find it interesting (https://www.stockholmviews.com/p38/).
I'm also working on a alternative pressure/over temp contoller based on a arduino nano some info on that can be found in my FB group https://www.facebook.com/groups/RRP38. Kind regards/Stefan

JLImmelman wrote:

stefan63 wrote:

Would you mid sharing your CAD files (I'm using fusion360 but .stp .step files could also work).

Kind regards/Stefan @stockholmviews.com

I tried sending you the CAD files, but it seems your email address is blocking it?
This is the response I got:
Message blocked
Your message to Stefan@stockholmviews.com has been blocked. See technical details below for more information.
The response from the remote server was:
550 5.1.1 Unknown recipient

Cheers,
Justus

This looks great!
Did you get it mounted I'm thinking tell us how and show us some pictures please :D
I thinking of doing the same mod sice it gives kind of a good feeling with a 100% duty compressor on board ;)
Would you mid sharing your CAD files (I'm using fusion360 but .stp .step files could also work).

Kind regards/Stefan @stockholmviews.com