rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Electrickery
  4. Heater core temperature sensor short to ground
Heater core temperature sensor short to ground

j_rov

Member
Joined:
Posts: 222
#1

Hi Guys, looks like i need to replace my temp sensor. Whats the latest on getting this part? I can't seem to find it anywhere?

Cheers

Symes

Member
Joined:
Posts: 375
#2

It's made of unobtainium in short you might be lucky on eBay ---£100 believe it or not or try a breaker for one ---- but the part unavailable 🙄

Gilbertd

Member
avatar
Joined:
Posts: 8080
#3

Or 81p from RS Components. See here https://rangerovers.pub/topic/2147-heater-core-temperature-sensor-thermistor

j_rov

Member
Joined:
Posts: 222
#4

i'm up for a bit of diy... will have a look.

thanks

j_rov

Member
Joined:
Posts: 222
#5

Well this seemed to work fine! I used the existing sensor bracket and drilled out the alloy pad that touches the pipe, replacing directly with the thermistor. Then 2 x 1.5mm holes through to the collector pins and poked the thermistor legs through. Heated the pins with soldering iron and touched a bit of solder on the legs to join them together.

Nanocom shows a reading now and no faults. Happy with that!

Are you sure that you want to perform this action? This action is irreversible.