rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 24

Hi folks,

Can someone recommend a really good sparky that could do a small bit of work for me on my P38? I just need a couple of the connectors removed/replaced and soldering. I can travel within reason but need the job done asap.

Cheers

Craig

Member
avatar
Joined:
Posts: 7756

You don't really need a sparky, just someone that can use a soldering iron. If, as I suspect, you are talking about the connectors behind the footwell kick panels, it just needs doing carefully, one wire at a time. Snip one wire at one connector, solder a short jumper wire to it, snip the matching one from the other connector, solder the jumper wire to it and then move on to the next wire.

Member
Joined:
Posts: 24

Yep, that's exactly what needs to be done. I am unable to do it.
Thanks

Administrator
Joined:
Posts: 96

Aw man I work in Hamilton but I'm crazy busy right now. Will you survive a couple of weeks with it the way it is?

Member
Joined:
Posts: 24

Gordonjcp-adm wrote:

Aw man I work in Hamilton but I'm crazy busy right now. Will you survive a couple of weeks with it the way it is?

Sure. The dash lights haven't been working for months now. I have gone right through absolutely everything with it and this is hopefully the last bit of the puzzle to sort it out. Hopefully.