rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 383

…. But it seems it can. Apparently it has been running happily for 10 years like it.

What do we think?

Member
avatar
Joined:
Posts: 8082

Mines just the same, missing the screenwash cap......

Or are you referring to the disconnected heater hoses or the lack of ABS and an old school servo and master cylinder?

Member
Joined:
Posts: 383

Screen wash caps - Subaru at about $1.00 each fit just fine.

Member
avatar
Joined:
Posts: 1228

But...why?

Member
Joined:
Posts: 383

Well the fellow lives in Borneo, so I'm guessing it was a lot easier to work out how to fit a Tojo one that get RR support.

Member
avatar
Joined:
Posts: 1228

I guess that's not a bad reason - if its done well and safely, I'm not hating on it - just couldn't see the appeal but that makes sense.

Member
Joined:
Posts: 781

Advantages would be cheaper more readily available parts, a simpler or more conventional braking system and easier to fix if you are in the sticks.

Disadvantages would be no traction control, no ABS, possibly less power from the brakes? ... vacuum servo vs high pressure pump.
Front to rear braking split could be solved with an adjustable valve.

Member
Joined:
Posts: 671

What am I looking for - or missing - except for the fact that there is no cap on the windscreen washer bottle ?

Pierre3.

Member
avatar
Joined:
Posts: 8082

No ABS modulator, just a conventional master cylinder and servo.

Member
Joined:
Posts: 781

Modulators are bloody expensive new, like £2 to £3k, so that would be the reason for doing it.
There are different types as well. I am not even sure if you can buy new modulators now. Could have been on the dealers shelf for 20 years.
I got a few used modulators that have popped up on Ebay just in case. Along with Wabco controllers which sometimes go and used booster pumps.