JLimmelman wrote:
Has anyone come across a 3D CAD model of the valveblock? Or even a dimensioned 2D drawing?
I have never seen a 3D CAD model or even an engineering drawing of the valve block.
The outside is a fairly simple shape, just rectangular blocks, so it should be possible to draw an approximation, to aid fitting it into a case for example.
However, the inside of the valve block is quite complex, with all the ports and internal passageways. To come up with a model showing all that detail it would have to come from official sources I think.
3D scanners are getting better all the time, so that maybe the route to get a scan of the outside of the block.
2000 Range Rover 2.5 DSE HP24 auto, uprated torque converter - JFearn chip, larger intercooler, removable winch, stainless exhaust, alloy radiator, Gen III's, Terrafirma +2" shocks, GG AT2/3's.
Full Fat Faultmate able to do all models.
- ex 1996 Discovery 2.5 300Tdi diesel auto
- ex-1982 Classic 3.86 Perkins diesel manual