rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Oily bits
  4. Removing wheel hub,
Removing wheel hub,

StrangeRover

Member
Joined:
Posts: 1081
(Last modified: by StrangeRover)
#1

Hiya Gents having an issue with removing the hub,

I'm doing the balljoints and I've taken out the 4 bolts holding the hub to the knuckle but the bloody thing won't shift..

Is it a case of just beating it off with a hammer or am i missing a trick??

Thanks.

Gilbertd

Member
avatar
Joined:
Posts: 8081
#2

Put an old brake disc on back to front and hit it with a sledgehammer.

StrangeRover

Member
Joined:
Posts: 1081
#3

Sounds easy enough..

Thanks.

Bolt

Member
Joined:
Posts: 377
#4

Remember: If it sticks, force it. If it breaks, it needed to be replaced anyway.

Are you sure that you want to perform this action? This action is irreversible.