I bought myself a remote filter from Marty and decided to install it today. I also have a new door latch, which i havent fitted yet due to a missing connector that i'm waiting on coming.
So i tried fitting the filter today and havent had much luck. The remote isnt currently paired, and the RF module was disconnected to stop the usual battery drain issues. I plugged the new box in and reconnected the receiver, and tried to pair the key using the "turn it in the lock and press buttons" approach. It didnt seem to work.
So i figured i would disconnect the new filter, and just connect the receiver in its normal way and try pairing. That also didnt seem to work.
I dug out the nanocom, and opened up the RF menu, and it stated "The BECM has not received a valid radio code". I cleared it and tried pressing the buttons to see if it would change, but it just continued saying the same thing. I dont know if its supposed to update and show a code etc though.
Any idea whats going on? Theres a possibility that the remote pairing isnt working due to the dodgy door lock, it was locking and unlocking mostly fine when i tried, but the latch is iffy and intermittent so maybe thats affecting things, but the BECM saying it hasnt recieved a radio code seems strange?