rangerovers.pub
The only place for a coil spring is up Zebedee's arse.
Member
avatar
Joined: Jun 17 2018
Posts: 467

EAS software doesn't give me the "good idle"

and it keeps flickering green and red...

The car is also sitting pissed again, and i can't adjust it!!

piece of shyte.

Member
avatar
Joined: Dec 30 2015
Posts: 4340

Go into Comm Port advanced properties in device manager and change the maximum data rate to 4800 baud. That should sort it.

Member
avatar
Joined: Jun 17 2018
Posts: 467

Cheers Richard...

Didn't seem to do anything

Member
avatar
Joined: Dec 30 2015
Posts: 4340

What computer are you using, what operating system and are you using a USB adapter. If so, does it have the FTDI chipset or Prolific?

Member
avatar
Joined: Jun 17 2018
Posts: 467

Hp laptop with windows 10..

As for the chip, i have no idea Richard, is there a right and a wrong?

Member
avatar
Joined: Dec 30 2015
Posts: 4340

FTDI just work, Prolific might work sometimes but are well known for dropping the connection when they feel like it. In Device manager, under Ports, you should be able to look at the driver manufacturer which should tell you. I've never actually tried to use any serial comms under Win 10 I'm afraid, I know they work faultlessly under Win XP but normally I just use a very old laptop with a serial port running Win 2000.