rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
offline
77 posts

Customs documents?

I thought Hawaii was a part of US?

th.

Long time ago so I don't remember the exact symptoms, but ended up as being wheel bearing, and was not found until the car was pushed in neutral on workshop floor. The bearing felt fine when jacked up, but gave a 'click' sound when the car was pushed on the floor.

th.

Gilbertd wrote:

You've go the wrong car then. I've always said if you can't fix a P38 yourself and always take it to a mechanic, it;'ll bankrupt you.

Even though it's relatively easy to drop the tank, it still requires getting the car high enough, crawl under it, and messing with fuel lines etc.

Lots of other repairs can be done more easily, the main thing is being able find whats wrong (without calling a mechanic), what is required to fix it and then work on what we can ourselves.

th.

Not exactly the the same, but the first indication I had of the leaking petrol pipes by the tank, was smell, then when the leak got worse it took suddenly longer time to start.

th.

A novice guess is that a drivers side latch works even if that side is not the drivers side in that car.

= RHD RH latch works also in LHD (RH)
= LHD LH latch works also in RHD (LH)

th.

Thanks 🙂

Shipping cost (to Iceland) is probably a bit high.

I liked the gen III's and even if the ones they are producing now might fail in extreme stretch, keeping a spare one to throw in ef needed is not a big problem.

th.

Thanks Harv, I was also happy with the handling, but since I was replacing very worn originals, I wasn't sure what of it was only because they new vs. very worn.

I still have them (on my old, drowned, 2.5 dt) , but even if they have not been used for very long time, they have been standing outside all that time so I'm not sure it's a good idea to put them in my current one.

Might consider your offer, where in the world are you? (I've probably seen it sometimes but my memory is...)

th.

Is it Arnott gen II or gen III that you are replacing?

Asking because it would be interesting to know if you feel any diffefence in handling.

th.

Since it's only the 'illegal blind area' (marked in orange) the extension mirrors can really be almost total crap, and still be legal and do what they're supposed to do.

But of course, properly stable, convex mirrors are of much more help.

Some years ago I bought a decent set of extension mirrors since I was starting to pull our folding caravan (Esterel) with my Olds (after drowning my P38) , but since I replaced the Olds with Buick Rendezvous I didn't need them (the mirrors on the Buick where really great). Then we sold both the Buick and the Estetel, got me a P38 and normal caravan, and since it is very wide I needed the extensions. And they sre simply great. (no idea what brand though).

th.

Exactly.

In a vague defense of my inaccuracy, in saying 'behind the car', instead of 'alongside' or something like that, i blame my knowledge (or lack of) english, being not my first language...

th.

The purpose is to see better right behind the car, even if just marginally. That's all they are there for.

th.

Geoellis wrote:

With my ‘97 GEMS I am able to lock with the fob and unlock with a spare key blade. No immobilization issues. This seems to be a unique, yes positive, issue. Thoughts as to why so that I don’t change something and screw it up?

Where are you located?

Both mine have always worked like that.

th

At least, when all wheels have grip, the power is distributed evenly, which should be easier on the diffs, even if you are towing or flooring the pedal with the humongous power of the 4.6....

th.

Bought my first RR almost 32 years ago, my first P38 exactly 21 years ago, still haven't been able to sell any of them so the only profit is enjoying driving them.

th.

Gilbertd wrote:

It's also on rr.net. Looks to be a nice tidy car but advertised in the wrong place. Think about it, why advertise a car for sale to people that already have one?

Raise hand all ofyou that have only owned one!

th.

Start with removing that side. The ones on the other side are very likely to be in similar condition as the other three (1,3,7). Then you can decide if there is reason to continue on that side.

th.

If the handbrake is holding and with gearbox in P it would only turn if the transfer case is broken.

th.

It's quite common that people misunderstand how the bw transfer case works, there is a good diagram here:

https://www.4x4community.co.za/forum/showthread.php/249882-P38-Vibration/page2

And some discussions here on the other side

https://www.rangerovers.net/threads/p38-driving-with-rear-prop-shaft-only.356996/

The front drive goimg via the vc is misleading as it does not go through the vc itself, but the outer part of it.

th.

If you can move the front with rear and gearbox blocked then there is definately something wrong.

The transfer case is diff, and as with any other diff, if you can move one end with the other two blocked, something is wrong. The viscous coupling is there to provide diff lock.

As Ashcroft Transmissions put it:

"A common problem with the Range Rover BW transfer case is a “seized viscous coupling”. This can easily be identified by the effect it has on cornering, the tyres will “chirp” or “scrub”, as the vehicle is effectively permanently in diff lock. As a confirming check, put transfer case in “neutral”, handbrake on, jack up one front wheel and try to turn it, it should turn slowly with resistance, if locked solid the viscous coupling is seized, and will need changing before any damage to the diffs or CV joints occur."

They provide more detailed info in the technical part (as you quoted), here without any additions:

1) Secure the output shaft …

2) Apply a clockwise torque of 27 Nm to the (front propshaft) output flange nut. If no resistance to turn is felt, unit requires replacing.

3) If resistance to turn is felt, apply a clockwise torque of 20Nm to the (front propshaft) output flange nut for 1 minute, this should result in a rotation of approximately 25 deg – 30 deg. If no rotation or a greater force is required, unit requires replacing.

Note that in 1 they say output shaft (secured with handbrake or possibly both rear wheels on the ground and choked), not mentioning the gearbox.

th.