rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
offline
16 posts

Well< looked for trhe ccd changer< found the hole but no hardware the cd player is a low budget kenwood
Having the system stripped out of my old one to replace the piece of shite in the new one<
as for trim level not that much different from base as far as i can tell< colour matched carpets and piping?
as for the wood< why would you put so much plastic on top of it< that you can no longer tell if its real wood or not? crazy to my mind>
But the thing starts and goes< and i am once again enjoying the life in a big old ranger again>

So, old p38 4..6 died with head gasket problems again after 400 miles. I refuse to pay out to have them changed again, So it can be some one else's problem, quite likely the scrap yards.
So left with the thorny problem of what car to buy that can take my electric wheelchair? looked at all the newer stuff, and the mobility cars, if you want to pay them 3 grand down every three years, bugger that! so the only car that fits the bill, is the good old ranger. spent a month trying to get a good 322, failed, so bought a vogue4.6 on a 2000 plate and with a thor engine.
The difference between the thor and the gems in initial pick up is quite remarkable.
with the gems, you have to pick your moment, and floor it, with the thor, you have to regulate how much welly you give, in case you end up entering the car in front for a cup of tea!
Not sure what makes a vogue better than the rest though? Sure its got piping round the chairs, and the plastic wood on the console, but is there more to it?
It doesn't even come with a multi cd player, so having to strip the one out of the 'dead un' and install it into the 'live un'. Probably along with the boom box, as the original one in the car is shite to say the least!
Are there any other changes that make a 'vogue' worth the different tab?

So glad i'm not the only one!
Somewhere in merry England, there is a series 3 driving round with a spanner attached to the underside, where it fell and got wedged and my overly large mitts couldn't get to.
As it was a cheapie, didn't mind losing it. The Snap-on's though.....

DOH! yep sorry!
I'm in Ipswich in sunny old Suffolk, but strangely enough, will have a car that can go places, well, at least that's the plan. But, being a range rover, things might not be so straight forward, may have to plan the journey in stages, bit like ice ages i guess?

Hi all, looking at buying an old l322 {to replace my now dead p38} of some sort. the ones i see rarely have gas fitted to them, and after the amount of money the system on my p38 has saved me, looking to fit out again. Only thing is, my tool kit has meccano stamped on it, so self fitting not an option. does any one know who could fit a gas system to the car, and if possible a roundabout figure of costs?
I am not interested in the type, mainly cos i have no idea what they mean, just as long as it works.
Any answers gratefully received.
Ade.

So glad its not me then, once again i am not insane, and can tell the wife she has misdiagnosed me again :0

evening, just managed to log in after fighting the bloody captur picture nightmare!
says i need a plug in on one of the pages. any idea what the plug in is and where i can get it from pretty please ?

hi Chris wil go and look

Just had the sniffer dog on it seems it has hyrdrocarbons in the water
the leading line now is that it has lunched its new head gaskets which were changed last year a massive three hundred and forty miles ago
and to add to the woe now the laptop wont use the dot and comma or even numbers< life is getting better and better>

Having just come across the 'joys' of owning a p38, i am somewhat confused.
have asked the forum why the demonbeastchild i own, would go for fine for ages then hit the red, enough to make some lovely tea, whilst steam cleaning the engine bay, then drop like a stone, then hit the red again. Had the head gaskets replaced as it was pointing towards that as a problem, and it was. then it went nicely for a while, try three weeks, before going back to its global warming routine. rr.net reckons that a liner has slipped and the engine is junked, or that the computer is alternating the water flow. the last one through me a bit, do rr's have computed water pumps at all? i know just about every other damn thing is, but a water pump?
realised i'd got a different site than this after a few pm's.
ended up on there as i got the url wrong and google happily transported me across the pond and beyond. interesting chaps to be sure, got some good advice from them, which i guarantee i will never ever action. is the aircon acctually linkewd to the cooling system? And i like the EAS, which is why i bought a rr, the suspension is brilliant for my rather crumbling spine. fail to see the need to replace with expensive springs, and have a new eca? fitted, which can be supplied to me at a bargian price along with the springs. i've had LR's for years before buying a J... but just didn't like it too much.
do these cars need complete rebuilding every other weekend, or could i expect some days when it will actually work? have to say the series 123 were never such a problem child, all you needed to do on them was weld the chassis every ten days.
So... over heating, as in big time overheating, would it be an airlock, thermostat or knackered engine, any help gratefully recieved.

Ta very much, have looked on the sites, they do the parts i have. Although due to the Gov. deciding I've had a miraculous recovery, and am no longer disabled, not much I can afford, might stretch to a filter kit :-)
One day when i wake up from this nightmare, I'll fit a different system to Beastie, till then, I'll keeping stalling with the Impco.
Ta very much for the help, really good of you all.
Ade.

yep probably a 94, but as i said, i am no mechanic. i know you put fuel in one end, and water in the other, and if you fuck that up, it won't go!
not too sure what i looked at then? should be the bit where all the leads end up? There's a 'thingy' in there, (nuff technical talk from me!) but it looked ok to me.
But then i repair squeaks and bangs by turning the radio up!
Hi Chris, will look forward to the chat, i am as you know, clueless! You get to chat about that big annoying piece of spectacular American metal engineering that was always in the way again.

oh goody! i do so love having simple stuff to fix!
it is a huge system in size, which looks like you could fit it on a truck. worked well for the last three years, but now not so much.
will see if there are parts inside it.

thanks for the replies.
Big Girl is a 93 plate with 203000 on the clock, but with a rebuilt engine at 190000.
it ran very well before hand, would even start on gas in the summer, but not in winter. Have learnt a lot more about gas systems just reading this site, thanks to Chris who did the head gaskets for me and pointed me to this place of learning! He's a really nice geezer, and seems to know his way around these motors, which i don't.
the Impco is a bloody great thing sitting to one side of the engine, and plugged in by a huge pipe straight from the airbox. Haven't had it serviced, as no one in Ipswich wants to touch them it seems? all bar one that is, but I ain't paying £700 for a gas service!
Had a couple of back fires, one totaling the airbox in quite an interesting and exciting way, the other just scaring the straights across the road. other than that she has been good to run for the past three years. looked at the rotor arm, looks to be in good condition, but happy to replace it, if any one knows of a good make to buy? leads though, seems i would need another mortgage to get them!

have a 1993 4.6, which is nice to drive, expensive but nice. i have an 'Impco' gas system fitted, which always worked well, until a head gasket change, now it won't idle, or run very well. Had new plugs with the new heads, just wondering if that may be the problem, and if changing leads and regapping the plugs might work?
found this from a gas fuel pseudo expert. Sound right or not?

Items such as Distributor caps, HT Leads, Rotor arms etc. can appear to be serviceable but cause problems when on LPG. This is because LPG / Air mixture is much harder to ignite than Petrol / Air. The voltages generated are up to twice as high (expect to see spark voltages of 10-15Kv's on petrol, whereas on LPG they can reach 25 -30Kv's). Higher spark voltages are likely to break down the insulation of any component, causing 'tracking', misfiring etc. which results in backfiring. Thus, faults that are NOT evident when on Petrol can show up on LPG. Although all engines can suffer misfiring caused by old parts, in 6, 8, 10 and 12 cylinder ignition systems the spacing between the 'poles' on the distributor cap can be quite small. It is easier for a spark to 'jump' to the wrong pole as a result. It's crucial this and other components don't cause this problem when running on LPG. As a result, the voltages within HT components can become far higher when running on gas as opposed on petrol, typically 12-15 Kv's on petrol and up to 30 - 35 Kv's on gas. Meaning the insulation of HT components is at least twice as likely to break down running on gas, often resulting in tracking, misfiring etc. The point where we hear the statement 'It doesn't misfire/backfire/ stall on petrol'. In the light of the above, it wouldn't. To help reduce the problems when running on gas, set plug gaps to .030" (.75mm). See what a reduction in plug gaps does on a 'scope. Too wide = High voltage. Reduce gap = Reduced voltage. Reducing the plug gap won't dramatically remedy backfiring, but it will certainly reduce the risk. Another factor often missed is that once HT leads etc, have been exposed to higher than normal voltages their insulations are damaged to the extent that a later reduction in plug gaps cannot stop the leakage. Misfiring and the ensuing backfire will still occur. You'd expect something to be damaged by this! Such damage makes just the place where damp likes to dwell, making things even worse. If that is the case, only replacement of the damaged components will cure the problem if the backfiring is really due to ignition faults in the first instance.

mine says 'impco', so, how bad is that one?
especially as its just started to run like a dog?