Strange indeed - thank you for your thoughts, Gilbert, it is appreciated. I've got an ex-Harwoods chap who is going to investigate over a weekend in Nov, I'll let you know what he finds (if anything). It is the 'its fine' and then 'it stops' that confuses me.
Hi Gilbert, sorry this has taken so long, but I finally got the blower motors changed, and no difference unfortunately - all works fine for a while and then the air flow stops though the fans keep running. I've had it on the diagnostics a couple of times and these faults come up: 'Left Recirculation Door Motor Circuit Fault' and 'Evaporator Temperature Sensor Circuit Fault' - the latter a bit surprising as the sensor is a new genuine one installed in June, though it could be wiring, I suppose.
Do you (or anyone else!) have other suggestions about this, please? Many thanks.
I checked after a trip yesterday and the flow is not being directed to the screen - or anywhere else in the car, though I can feel little 'seeps' of air around joints in the dash, so teh A/C is working, just not going in the right place. Stupidly I forgot to check that the fans were both running after the trip when the problem was evident.
This still sounds a very likely explanation to me so I've ordered some replacement fans and will get them changed; I'll update when done. Thank you again for your time.
I'll do that today - though with a query as the system works perfectly to start with, the problem only arises after some time.
Hi Gilbert, I had a couple of long drives yesterday and on both teh air stopped flowing into the car after about 50 minutes. Sadly pressing the recirc button didn't change anything - though considering what a lemon the car turned out to be it is very likely that the button doesn't work and the inlet vents didn't close. I'm going ahead with changing the fans and will update in due course. Thank you again, Simon
Gilbert,
Thank you very much, that sounds highly likely, I'll try the re-circ button when it happens next. I'll let you know the result.
Thank you again, very much appreciated!
Simlon
I have a strange issue with my P38 HVAC. The car was off the road for a couple of months due to a blown head gasket, and after the the HVAC was not blowing properly. The blend motors were replaced and calibrated, but now although the HVAC starts OK, after a while there is no air coming through the vents even though I can hear the fan running. Diagnostics do not show blend motor faults and the internal ambient and evaporator temperature sensors are new.
The system seems to work longer when cooling than heating but recently, at best, it will operate for about 60 minutes before the airflow stops - the fan still running.
I am at a loss, can anyone suggest what the problem and solution might be? Many thanks for your time, Simon