too start with gilbertd made it sound easy, but anyway I have ordered a 16" pz2 so will give it a go at the same time (sorry same weekend) as I try to do my obd connection (thanks for info Martyuk ). she has got air con so I suppose ill just have play nicely.
thanks to every one for your help
cheers Steve
hi everyone
please could someone tell me how easy it is to change O-rings on heater matrix and what do you have to remove to get too it. also I think one of my blender motors has gone I think.
cheers Steve.
hi everyone
thanks for all the information.
I looked for the connector last night and found it. its so easy when you know where to look and what to look for. I am working away at the moment so wont get chance to play until weekend. it has been very damp and is going green in places, what is the best way to clean the connectors?
also while I was looking I saw the dreaded antifreeze trail so the O-rings must of gone too but will post in oily bits about that.
many thanks again
cheers Steve
hi tiv68 here
I'm new to this forum, but have been helped before by Gilbertd on another one with my lpg (which is now not working again but that for another day).
I was on the other forum for help with my obd connection and Gilbertd gave me links to rave (which I now have) for wiring diagrams.
I have purchased a nanacom for my p38 1998 4.0l gems. it will connect to eas and air bags but nothing else just says connection error to ecu..
i was told that obd connector could be corroded looked and wire/connector 7 was corroded to the point it came away from socket, so i purchased a new wired socket and soldered it in place, but when i stripped wire 7 back it was black on the copper , i soldered it any way but it still wont connect,
my question is can put a jump wire in from 7 on obd socket to becm. on wiring diagrams i can find on rave it says it goes to pin 8 on becm and to brake abs i think, (i could be totally wrong). where is pin 8 on becm as there are many plugs with more than 8 wires i know they are all different colours but i need help.
spanners and welding no problem but wires!!!!!!! and i don't want to damage anything connecting it wrong.
any help would be greatfuly received.
regards Steve