rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
Joined:
Posts: 515

MERRY CHRISTMAS
to all and a happy new year...

Member
avatar
Joined:
Posts: 7754

It may be for you, it hasn't got here yet......

But, MERRY CHRISTMAS to all, no matter where in the world you may be.

Member
Joined:
Posts: 515

i get to go first for a change , the sun came up 4 hours ago its 10 o'clock hear and definitely not snowing, a sunny day for us.
make sure you over indulge and don't forget to drink to much and play with the kids, as that's what they really wont . best wishes to all

Member
Joined:
Posts: 766

Cheers guys, have a good one. Apart from drinking too much and playing with the kids, don't forget to set some time aside for your P38 - no better time to start on the head gasket tear-down, or EAS compressor rebuild than Christmas Day

Member
avatar
Joined:
Posts: 7754

I've got a drivers window regulator to fit but suspect I'll leave that until tomorrow. I've got a Christmas dinner to cook today (no way I'm letting a foreigner anywhere near the kitchen today!) and she's working tomorrow anyway as she works for an international company, some of their clients don't celebrate Christmas so they want a skeleton staff in.

Member
Joined:
Posts: 331

Christmas??? Is it??? I've been in Grimsby hospital for the last twelve days. 😢😢 hoping to escape by the weekend.

Member
Joined:
Posts: 2426

Merry Christmas everyone - and good health!

Member
avatar
Joined:
Posts: 1228

Bah humbug, etc.

Member
Joined:
Posts: 501

Hah bumbug ;)

Member
Joined:
Posts: 1345

Merry Christmas everyone!

Get well soon OldShep.

Member
Joined:
Posts: 334

Happy Christmas everyone from the CVC. Currently an empty shell but back on it's front feet and turning into a lightweight p38 as the rust falls away.

Gearbox and transfer case safely in the hands of Hardy Engineering.

enter image description here

Member
Joined:
Posts: 803

Merry Christmas all!

Member
Joined:
Posts: 1345

Very nice shiny and new looking @DavidAll, aiming to make a show car or something?

Member
Joined:
Posts: 1327

OldShep56 wrote:

Christmas??? Is it??? I've been in Grimsby hospital for the last twelve days. 😢😢 hoping to escape by the weekend.

Get well soon mate.

Member
Joined:
Posts: 1327

Merry Christmas everyone,, I’m out today putting new window reg in mine, although god knows why,,, lol

Member
Joined:
Posts: 339

12 days in Grimaby Hospital, if it’s anything like Ireland’s NHS you are probably in the to get a thorn removed from your toe and on a waiting list....

Member
Joined:
Posts: 334

Hi lpgc,

I was looking for a p38 and this was a pre production car issued to the press at the launch at Cliveden. It would not normally be worth doing as there is a lot of rust in the rear bodywork, unused for a long time and pretty sad altogether.
As so often happens I thought I would get it running and use it and it turned into a full nut and bolt job.
Everyone on here has been really helpful and it's much appreciated. What I am not looking forward to is the electronics which are not my area of expertise at all. So we'll see how it goes. It's keeping me out of mischief.

All the best for the New Year

Member
Joined:
Posts: 1345

Great stuff Dave, is there a thread about your build on forum?

In case we're not online before.. Happy New Year!

Member
Joined:
Posts: 334

I have put one or two bits under CVC update and will try and add a bit more soon.

Happy New Year to you all too!