rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Oily bits
  4. 80mm P38 Idler NLA
80mm P38 Idler NLA

StrangeRover

Member
Joined:
Posts: 1083
#1

I've bought a 70mm and I' not really sure whether a 70mm can be used.

The idler I'm replacing is

Any ideas?

The idler below the AC compressor.

enter image description here

Blanco

Member
Joined:
Posts: 87
#2

I can see in the parts book it should be Part No. PQR101070 which has been replaced by PQR101150, but both are 80mm, be a bit surprised if there was that much play in the system? Better to get the 80mm if you can I would have thought.

Gilbertd

Member
avatar
Joined:
Posts: 8106
#3

What's your problem? Everywhere is showing it as in stock, you can even have a genuine LR one for under £40? https://www.lrdirect.com/PQR101150-Pulley-Aux.-Drive/

Marshall8hp

Member
Joined:
Posts: 383
#4

I see the Britpart one has a two year warranty as opposed the the OE, one year. I’d be tempted by the OE part though.

StrangeRover

Member
Joined:
Posts: 1083
#5

Cheers all.

Are you sure that you want to perform this action? This action is irreversible.