rangerovers.pub
The only place for a coil spring is up Zebedee's arse
  1. Forum
  2. Range Rover P38
  3. Opening time
  4. EAS valveblock Musings!
EAS valveblock Musings!

StrangeRover

Member
Joined:
Posts: 1081
(Last modified: by StrangeRover)
#1

Roight!

Chaps I have a removed my old Valveblock ready for a rebuild when the O rings come at the weekend.

enter image description here

Most of the pipes came out without fuss, however I did notice the Drive pack was an odd shade!

enter image description here

The area around the exhaust was black

enter image description here

The desiccant looks alright

enter image description here

Pipes look like they've been in and out a few times.

enter image description here

I've not touched it in 3yrs and neither has the previous owner or the chap before him, so it's been atleast 7 years + since it's last rebuild, if ever!

The block itself also has numbers scribbled on it, no idea if this signifies anything?

enter image description here

More to come later when it comes apart i'm sure!

Gilbertd

Member
avatar
Joined:
Posts: 8080
#2

Correction, pipes look like they've never been out. The grooves are where the O rings sit which is why RAVE says to trim 1mm off the end then chamfer with a pencil sharpener so the O rings bear on a smooth part of the pipe. Driver packs are always that colour.

StrangeRover

Member
Joined:
Posts: 1081
#3

Ahh,.

Cheers Richard

Can't imagine what it looks like inside!

leolito

Member
Joined:
Posts: 641
#4

That should be the color (dirty) of that silicon-resin where the electronics are, and which makes the driver pack not easy a rebuild ...
Numbers must have been scribbled when assembled, mine also has such ...

Marshall8hp

Member
Joined:
Posts: 383
#5

Numbers are typical of a wrecking yard. Part ID and location number.

StrangeRover

Member
Joined:
Posts: 1081
(Last modified: by StrangeRover)
#6

Pulled it all apart..

enter image description here

This looked suspect

enter image description here

Not ideal

https://i.imgur.com/Tmht1TXl.jpg

enter image description here

enter image description here

The NRV's still looked ok.

enter image description here

Built up and ready for when I manage to get a compressor!

enter image description here

Gilbertd

Member
avatar
Joined:
Posts: 8080
#7

I thought you bought a compressor recently?

StrangeRover

Member
Joined:
Posts: 1081
#8

Its still at rimmertwats at the moment!

Are you sure that you want to perform this action? This action is irreversible.