I got the warning 'Beep!' & the message FUSE 10 FAILED. I checked the manual & Fuse 10 is the driver's seat (RHD) & indeed I discovered that I could not adjust my seat. Fuse 10 is conveniently located in the little fuse box under the right hand seat. I then spent about ten minutes scratching my head as the fuse appeared to be OK. Eventually I realised that I was looking at the wrong 30A fuse. Once I found the correct fuse I confirmed that it had blown & replaced it. The seat can now be adjusted again. The heated seats have never worked & I have never bothered to fix them as I am not a fan of heated seats. As a former co-worker commented to me regarding his new car with heated seats "It feels just like I pissed myself!😀

Mina says that every time I turn the ignition on and has done for about 8 or 9 years, only on mine it says FUSE 20 FAILED. Fuse 20 hasn't failed and as it supplies power to the passenger electric seat I don't have, I just ignore it. Apparently there's a resistor on the BeCM power board that is part of the fuse checking circuit and it sometimes fails. I've got a spare BeCM power board that would cure it but have never got around to fitting it. I've got so used to it, if I don't get the Beep when I first turn the ignition on, I'll probably think something is wrong......