rangerovers.pub
The only place for a coil spring is up Zebedee's arse
Member
offline
685 posts

Question related to the above ... last time I was by my battery supplier we engaged in a conversation about the subject of the "bogger is better", of which I am an advocate, and "fit what is specified" which was his opinion.
We were not talking about the P38 in particular, but about a normal car and regular city car use.
Hi statement was grounded on the basis that a higher Ah battery might take more time to be filled to its capacity by the standard alternator, and therefore in short runs never reaching total charge and shortening battery life.
As I have never seen this matter from this point of view, you guys running +100Ah batteries in the V8s, do you reckon a shorter battery life due to this problem?

I like it a lot! Wait to see fab work and prototype ... keep track of costs and tooling you might have a winner for a (limited?) production series :-)

Nice ride!
Agree on the "black on black" horrendous look ... distasteful. Well, imagine the leading influences in that fashion and you got all the answers you need! :-)

uh, i forgot to mention I also had the front interior light going KO and the headlining "stained" once I left the sunroof open in the tilt postion and it rained. Curiously, on the +20 years old audi we work on this does not happen and they leave with the sunroof open ...

i think the reason for non insulating the metal is just because of cost savings ...

wow good!
for what I can say ...
... the belt slider is a sure break everytime you touch them, so don't feel bad about it.
... that "washer tube" thing is present here and there in many seals, also mine has it in the rear doors. I think is made to help the seal make the "turn" around the metal.
... I solved the leak into boot issue by purchasing a very small hose and fitting into the seal itself. Now the closing needs is a bit more of a 'robust' hand, but it did the trick. It all depends on how bad is your seal. A mate in Italy tried the same and it did not worked, and he bought a new seal (at a hefty price).
... having the headliner down I can recommend you put some insulation material in the roof metal, it does make a difference ...

This is interesting, I've done recently the core and the o-rings, and I was tempted but not sure how to go at the AC evaporator ... I thought the entire metal frame had to come out - and the steering column as well.
Since I have not mounted anything back yet (sigh), I am still in the territory to have a go at it ...

hope the post was not about something broken! lol

happy anniversary pub! you guys rock! :-)

I've got my seats sorted out, it is time to start clearing trim items ... now that the specter of a hard brexit seems dispelled, it means if somebody wants something I can ship it ....
From my donor I've got nice set of skins in grey (Dark Granite), I can give only the skins, the foams, even the seat bases and backs (electric with memory post-99), but the weight might make it unreasonable.
Being a LHD car, the good about it is that the the seats are ideal for an UK driver ....
Door cards are also in great shape and with the HK speakers and leather.
I also got a couple of Lightstone items, but still need to sort them out.
As always, the boss said "mates rates" and I oblige :-)
Some photos ...

enter image description here

enter image description here

enter image description here

enter image description here

enter image description here

enter image description here

Too far to help ... :-)

Still .... how many cars still going around with their fans ....

I've managed to rebuild almost all the damage, still got the oil pipes gearbox <> cooler which I dread to do ...
Good luck finding a complete and good looking bonnet AND insulation!

On acceleration, I know is not nice to say, but floor it when at a standstill and if it slips you will hear it like if it was machine gun fire ... when I mean floor it it means ... that :-)

Can't suggest for the parts, I do not have the will skills or interest in learning how to do the BW myself.

nice! :-)

the question is ...why would the fan disintegrate? Mine had no cracks and was not missing any parts in the blades ... however earlier in that year I had the water pump replaced ... and I wonder if some misalignment could have been the culprit ...

lol! been there, done that!
start up from a traffic light and BANG pop goes the hood thought it was the top hose blown but heck of a hose .... left a trail of water I was 600m from where I had to go (kindergarten, we had parents' meeting and as I had been missing to all of them woman instructed NOT to miss this one) and needle rising and the scangauge going after 100 but I prayed hold hold hold ... left the RR in the parking lot with a puddle forming and I ran to the meeting ... told the woman "don't wait for me for dinner"
same as above, but I managed to save oil pipes that are only ... half crushed. Unfortunately the rad was torn apart and this mean over an hour to make the 4km from the kindergarten to home, and about 10 liters of water .... but it brought me home :-)
Culprit was the rad, 2/3 blocked by crud by PO replacing oil cooler but without going that extra mile (learned my lesson).
incidentally for all RRP38 haters, it was the only time in 30K km that it left me (momentarily) stranded, and it still came home. love the beast.

Great job ... good to learn you can take the dash frame off without removing the steering column!

Sorry for the great delay, but only this week I've managed to accomplish this incredibly simple task which I've delayed weeks ... so here it is, the "tee" added to the return hose to the expansion tank:

enter image description here

enter image description here

enter image description here

I had a welder (my welding skills are very ... primitive) add a "bung" there and then attached a hose from the TBH return outlet. Would have wanted a thinner silicon hose like the one mentioned around here, but at the time seem unavailable. Since I grow impatient to move on with the build, I just snatched the first hose available and route it unceremoniously around the top of the engine, trying to keep it at the level of the "top hose" and the expansion tank itself ...

enter image description here

Et voila'! Engine running couple times for at least 15/20min, no leaks so far, very happy.
I've concluded my cooling circuit saga.
In time there are the LPG pipes to replace, and I want to add a Thermo Top heater, but this will be down the line...

men looks like new ... keep going when is possible!

My last change was with a Marly 10W-40 with graphite, and I am not sure with what I will go once the next change comes (soon I hope, as I got it running after 3 months in hibernation - more on the relevant thread) ...

I agree oils have modernized a lot and manufacturers follow suit - my Guzzi has an engine basically unchanged since the late 60s, and while the old recommendation was 10W-40 or 15W-40 in the early/mid 2000s they moved to 10W-60 and have remained on that. I changed to 10W-60 on mine, but I always need to refill a little within changes (the old 10W-40 one was not doing that).
I think in the venerable RV8 a ultra-modern, sophisticated 10W-60 would sound like a waste, but running always warm ... might be the right choice. Will give it a try, doesn't hurt ....

I guess it depends more on the engine condition than on the technology - I've noticed 5W-40 for a high-mileage or tired/worn engine is a waste, in those cases better to throw it what I call "liquid grease" and pity for the cold starts, engine is compromised and life is limited by then anyway :-)

I agree modern oils 5W-30 and the like are designed/engineering with emissions/low friction requirements in mind, not with lubrication and cooling requirements that are the real reason why an oil is needed ... my woman's recent addition CT200h (don't stone me, I was merely an observer) uses 0W-20 and I cringe at the thought ...

Nice ideas all! I like the "double" tailgate lamp ... will make that!
I wired two lights on the sides, above the wheel arches, and I used the typical "door sill" light from our junkyard audis.

Sloth is right, I tend to agree more than exotic collector's items, in time most P38 will only appeal to a few enthusiasts, which I think the British call 'anoraks' ...
The 'special editions' are really valued only because of the rarer accessories, some of them really hard to find.